EpoStone Clear (twinpack)
Complementary Chemicals
EpoStone Clear is a binder for the production of pebble surfaces Topstone - NEW RECIPE, higher UV resistance
Function:
Adhesive material for the creation of TopStone surfaces resulting from the joining of special stones and other fillers offered by TOPSTONE. Closed structure. Designed for interiors and for marble stones, possible irrigation of stones and other objects.
Advantage:
• Nonylphenol-free, harmless after curing, applicable to dry base coats up to 4% moisture and other suitable substrates, solvent-free, tough, long-lasting, does not flow down (ideal viscosity)
• Higher UV stability
• Use in indoor and outdoor spaces
• Intended for dry rock!
Characteristics:
• Two-component, colorless, low viscosity, solvent-free, epoxy-containing. (with max. moisture in the substrate up to 4%, with anhydrite up to 2%).
Further usage:
• Exclusive closed structure with high wear resistance, with optional water endurance
• Is applied after approx. 12 hours from the application of the open basic structure of the TopStone surface
• With a surface thickness of 1 cm, the consumption is 3 kg/m2, it is applied with a rubber spatula.
Production data:
During application and curing, EpoStone Clear Plus must not come into direct contact with water and chemicals (do not use in the rain!). The substrate must not contain water-soluble substances such as salts, solvents and the like. a. contain. For heating of premises no open oil and gas burners u. a. use that generate CO2 and water vapor at the point of realization. These have a negative influence on the surface quality.
Storage:
At temperatures > +12°C < +25°C, in a dry place in the original packaging. For the warranty period, see the information on the packaging.
Mixing ratio
Mixing ratio A: B by weight 1.7: 1 or according to the packaging label
Specifications
Workability of the material for 50 minutes at 20°C
Complete curing Full curing 7 days at 20°C
Compressive strength 70 N/mm
Bond strength > 3,5 MPa
Slip resistance (in case of dryness - in wet conditions)
fulfilled (≤ 0.5) according to ČSN 74 4505
Packaging:
The stated material consumption may differ depending on the specific conditions and specific application. Binder yield depends on the type of filler selected and the desired surface thickness.
Retail packaging 1,25 kg Twinpack
Wholesale packaging 30 kg / 540 kg
Safety
Safety of the chemical compound – a mixture of epoxy resin with a specially formulated curing system. Traffic classification – ADR com. A9 and com. B8. More information can be found on the safety data sheet. Fire extinguishing methods – dry sand, alcohol resistant foam, CO2, water spray. DO NOT USE WATER!!!
The information and data contained in this document is based on our best knowledge and experience. When using our products according to our recommended procedures on the materials for which these products are intended, there can be no harm or damage caused. The material, application techniques, and working and operating conditions are, however, outside our control and therefore our recommendations are only generally valid and cannot be used as the basis for liability.
