TopStone Interior

• Stone carpets work just like standard carpets, the dust particles stick to the structure, so the amount of dust is reduced.
• Preparation of the substructure, removal of incoherent parts, opening the surface (grinding with dust vacuuming).
• TopFix Interior Primer (consumption of about 0.2 to 0.8 kg/m2 based on the absorbency of the substrate)
• TopStopne surface laying using the EpoStone Clear binder; minimum thickness of the surface is 1.5x higher than the largest fraction size (stones), 2x is recommended.
• The surface is walkable after 24 hours at 20 °C and fully cured and loadable, including vehicle traffic, after 7 days.

Application: 

• living rooms, children's rooms, conservatories, etc.

Advantages: 

• excellent thermal conductivity, hypoallergenic - less dust

• Apply TopGel material (special three-component gel) to the basic open structure of the TopStone surface (see section A) after approx. 24 hours (or earlier depending on temperature).
• TopGel is applied with a special rubber trowel for epoxy and its consumption varies with respect to the fraction size of the stones and depends on the need to cover the surface.
• The estimated consumption for the 2-4 mm and 3-5 mm fraction size is 1.25 kg/m2, 
• the estimated consumption for the 4-7 mm and 4-8 mm fraction size is 1.5 kg/m2.
• Another TopGel layer can be applied after curing, if necessary.
• The resulting surface is walkable approximately after 24 hours at 20 °C.

Application: 

• kitchens, hallways, living rooms, etc.

Advantages: 

• surface without joints, the same maintenance as with ceramic tiles, practical matte textured natural appearance of the surface

More information: Material Sheet TopGel

• Apply TopLock material (special one-component paste) to the basic open structure of TopStone surface (see section A) after approx. 24 hours (or earlier depending on temperature), and follow by applying the EpoStone Clear material after full clarification.
• Recommended fraction size of the stones in the TopStone surface is up to 5 mm. Larger fraction size may lead to high TopLock material consumption and long curing time.
• TopLock is applied with a squeegee and the consumption is about 0.8 to 1 kg / m2, depending on the fraction size of the stones.
• Another TopLock layer can be applied after curing, if necessary.
• The resulting surface is walkable approximately after 24 hours at 20 °C.

Application:

• surfaces that are not permanently exposed to water
• hallways, living rooms, etc.

Advantages:

• surface without joints, the same maintenance as with ceramic tiles, practical matte textured natural appearance of the surface

Attention!!!
TOPSTONE Lock - closed structure - impermeable surface is not suitable for permanent water load.

• Apply TopLock material (special one-component paste) to the basic open structure of TopStone surface (see section A) after approx. 24 hours (or earlier depending on temperature), and follow by applying the EpoStone Clear material after full clarification. Recommended fraction size of the stones in the TopStone surface is up to 5 mm. Larger fraction size may lead to high TopLock material consumption and long curing time.
• TopLock is applied with a squeegee and the consumption is about 0.8 to 1 kg / m2, depending on the fraction size of the stones.
• Another TopLock layer can be applied after curing, if necessary.
• Apply EpoStone Clear binder (material consumption is about 0.15 to 0.22 kg/m2) to the closed TopStone Lock structure with a roller after 24 hours at 20 °C (the material must be clear throughout the whole layer as a proof of finished curing).
• The surface is walkable after 24 hours at 20 °C

Application:

• hallways, public spaces, frequently mopped surfaces

Advantages:

• better abrasion resistance, easy maintenance

impermeable surface for permanent exposure to water, higher wear resistance

• EpoStone Clear is applied to the basic open structure of TopStone surface (see section A) after about 12h. Recommended fraction size of the stones in the TopStone surface is up to 5 mm. Larger fraction size may lead to high EpoStone Clear material consumption.
• EpoStone Clear is applied with a squeegee, the consumption is approximately 1.5 - 3 kg / m2 (the structure of this system is closed throughout its cross section, thus the consumption depends on the thickness of the Topstone surface - the smaller the fraction, the lower the thickness - the consumption of EpoStone Clear in case of surface thickness 1 cm is 3 kg).
• Another EpoStone Clear layer can be applied after curing, if necessary.
• The surface is walkable after 24 hours at 20 °C and fully cured and loadable, including vehicle traffic, after 7 days.

Application:

• heavily loaded areas, areas permanently exposed to water, bathrooms, showers, entrances to commercial buildings, indoor swimming pools, vestibules, hallways, etc.

Advantages: 

• surface without joints, high resistance, permanent water resistance, the same maintenance as with ceramic tiles, practical structured surface

Attention!!!
The basic open structure of the TopStone surface must be approximately 2 mm / 2 m flat, so that the resulting surface after the closure exhibits the same structure and so-called slit sites can not be seen. These surfaces do not fill the waterproofing function, do not rip cracks, if necessary the substrate must be insulated (eg water-borne plants).When using TopStone on heated floors, we recommend using a full-circumferential expansion strip (TopStone Supplementary Assortment).